Peterson Standard System Pipe Refurb

Posted on April 26, 2018 by thecashkeepers

This was another pipe that I had the opportunity to clean up for a friend. Check out the before and after pics!

Stem
The stem had a bit of oxidation and chatter on it so I started with wet-sanding the stem. I used 500 grit, 1000 grit, and 1200 grit sandpaper. I then cleaned and sanitized the inside of the stem with pipe cleaners and high proof vodka. The finishing touches on the stem are two buffings, one with red tripoli and one with carnauba wax.

Bowl
The bowl got a good reaming and during the reaming I discovered some unevenness in the bottom of the bowl. I cleaned out the carbon dust, sanitized the bowl, and let it dry. To even up the bowl I used a professional grade bowl coating. I slightly topped the top of the bowl to remove blackening. I then cleaned and sanitized the shank which took quite a bit of scrubbing with high proof vodka due to a build up of tar. The bowl was finished with a buffing of red tripoli and a buffing of carnauba wax.

Here is the finished product!

Thanks for looking!

Peterson Emerald Pipe Refurb

Posted on April 13, 2018 by thecashkeepers

I had the chance to get my hands on this Peterson Emerald and clean it up for a friend. Check out the transformation!

Stem
The stem received my routine love. I wet-sanded off the oxidation using 500 grit, 1000 grit, and 1200 grit sandpaper. I then sanitized the inside of the stem and cleaned out any gunk that had made a home there. To finish the stem it received a buffing of red tripoli and a buffing of carnauba wax.

Bowl
The bowl received a reaming to clean off layers of unnecessary carbon build-up. After reaming it, I discovered that there were a couple of inconsistencies in the wood. I decided to sanitize the inside of the bowl and then put in a professional grade bowl coating to even it out. I then lightly removed the blackening from the top of the bowl. After that I sanitized and cleaned the inside of the shank very thoroughly to remove all of the tar build-up. The shank ring received a shining with some steel wool. To finish it up, the bowl also received a buffing with red tripoli and carnauba wax.

Here are the results!

Thanks for looking!

JC Newman El Baton Robusto Review

Posted on March 15, 2018 by thecashkeepers

The reason this review comes about is because a customer asked me to bring this cigar into my shop. I try to be as accommodating as possible for my customers when I have the shelf space. I brought in the El Baton Robusto and Belicoso. Both retail for $6.99 which I think is a good deal for an “everyday smoke”. I decided to give the robusto a whirl and here we are!

Blend Profile
Wrapper: Nicaraguan Corojo
Binder: Nicaragua
Filler: Nicaragua
The El Baton website does not give specifics about what type of tobacco from Nicaragua they use, just that it is from Nicaragua.

Appearance & Smell
This has a toothy, medium brown wrapper. It has some veins but the veins seem very fitting and not overbearing. The smell is earthy and a little oaky.

Smoke Preparation
I used a Xikar X1 to put a flat cut on the cigar. The cut was good and appears to have no construction problems.

Burn & Draw
The lighting process was easy and the cigar seemed to take an immediate and even light. The draw was nice, not too easy and not too hard, just an easy medium. As the cigar went on, it did start to burn unevenly a bit. You can see the unevenness in the picture above. Then it even back out which you can see in the next pic.

Strength & Body
Immediate impression is that it is a medium. As it goes on, it gains a little more strength. So medium plus at max. There was not a lot of complexity in terms of flavor variation and transitions. It was rather bland overall.

Final Thoughts
This cigar had good construction which is expected of anything coming from JC Newman. When it came to flavor and actually enjoying the smoke, it really wasn’t there for me. I found it to be bland and boring. Would I smoke it again and give it another chance? Yes. The notes of earthiness and oak weren’t bad but it got boring. I would be willing to give them another shot to see if my palate picks up something new. At an “everyday smoke” price, it’s well constructed and would be one that I could give out at any occasion and not feel bad about price or strength. Perhaps I will give it another chance soon!

Sourced: Locally
Brand Information: El Baton Website

Peterson Tankard Pipe Refurbish

Posted on February 2, 2018 by thecashkeepers

A friend sent me a Peterson Tankard that he had picked up. He asked me to make it shine like new again. So here are the before and after pics of the process! It’s hard to tell in the before pictures but there was a decent amount of oxidization that had occurred to the stem. I usually get better pictures than this so I’m sorry for the poor lighting/pictures. Trust me though, it really was an awesome refurb!

Stem
Even with the flash on my camera, it’s hard to tell that there was quite a bit of oxidation that needed to be removed. I wet sanded the stem using 500 grit, 1000 grit, and 1200 grit. The stem was then sanitized and cleaned on the inside. The stem is finished with a buffing of red tripoli and carnauba wax.

Bowl
This bad boy was pretty clean on the inside. There wasn’t a lot of carbonation that had to be removed. BUT the bowl had some serious ghosting, whatever tobacco that was smoked in this pipe before was very strong. So I reamed the bowl down and added a professional grade bowl coating after sanitation to help dispel any remaining ghosting (per request of my friend). The shank was then cleaned and sanitized as well. The metal ring was shined up with some fine steel wool. The bowl was finished with a quick buffing of red tripoli and carnauba wax.

I’m sorry that the lighting isn’t that great in these pictures. The transformation really was awesome! My friend will receive his pipe back soon and I can’t wait for him to light it up. Thank you for reading about this refurb and let me know your thoughts! Thanks!

Nub Connecticut Review

Posted on January 21, 2018 by thecashkeepers

The Nub Connecticut is not new for me but it has been awhile since I smoked one. I decided that I wanted a morning smoke with my coffee. The shorter size of the Nub line lent itself to be a great option for starting the day off right! Here are my thoughts on this cigar!

Blend Profile
Wrapper: Connecticut
Binder: Nicaragua
Filler: Nicaragua
Country of Origin: Nicaragua

Appearance & Smell
The pre-light appearance is a smooth, tan wrapper that looks delicious. The pre-light smell has creaminess and some cedar notes.

Smoke Preparation
I used my Xikar Xi1 to put a flat cut on the very end of the cap. I also used my Xikar Enigma double torch to get the cigar lit.

Burn & Draw
This had a great draw for a morning cigar. It was a little bit easier to pull through than I like my other cigars but it was nice to have an easy smoke in the morning. Burn stayed mostly even. You can see some slight unevenness in the picture above but it was never enough that I felt like I needed to touch it up,

Strength & Body
I found this cigar to be mild to medium. The Connecticut wrapper keeps it like but the Nicaraguan filler has a little more strength to it. The flavor was great! It stayed pretty true to the pre-light smell, lots of creamy richness, cedar notes, and a little bit of nuttiness.

Final Thoughts
This is definitely a smoke I would have again as a morning cigar. It paired very well with my coffee, the draw was easy, the strength was never overwhelming. Overall, I found it to be a great way to start my day and I would definitely buy some more of these! I will note that this cigar might be a little more mellow than other Nub Connecticuts because it was in my humidor since 5-18-16.

Source: Purchased Locally

Golden Grain Pipe Refurb

Posted on December 18, 2017 by thecashkeepers

This was another pipe that came to me in a lot of estate pipes. It’s a beautiful little Golden Grain. The grain in the bowl was gorgeous, so I just couldn’t wait to get my hands on the stem to make the whole pipe stand out again. Here are the before pictures:

Stem
The stem had some fairly heavy oxidation, so I wet-sanded it with 500 grit, 1000 grit, and 1200 grit. The tooth marks were shallow enough that they came out with the oxidation removal. The stem was finished up with a buffing of red tripoli and a buffing of carnauba wax.

Bowl
I reamed the char/layers out of the bowl and sanitized it with vodka. The vodka helped to clean out the extra carbon and dust. The shank received the same vodka cleaning with q-tips as well. The top of the bowl had some buildup, so I topped it by dry-sanding with 500 grit, 1000 grit, and 1200 grit. Then I re-stained the top to match the rest of the bowl. The bowl was also buffed with red tripoli and carnauba wax.

Here are the after pics!

Thanks for looking!

Wellington Churchwarden Refurb

Posted on December 11, 2017 by thecashkeepers

This was a nifty pipe that came to me in a lot that I purchased from an estate sale. It looked like it had been smoked once or twice but it still had a sale price sticker on the bottom of the stem near the button. I thought it was odd that it wasn’t removed when it was smoked. I’m not sure if it was the original sale price sticker or a second hand sale price sticker but it’s cool either way!

Here are the before pictures!

Stem
This pipe had quite a bit of oxidation. It looks like it had some water/liquid spots on it from long ago. Luckily I didn’t have to fight with tooth marks! A quick wet-sanding with 500 grit, 1000 grit, and 1200 grit. It was finished with a quick buffing of red tripoli and a buffing of carnauba wax. I did remove the sticker to gain uniformity in the vulcanite.

Bowl
Since the bowl only seemed to be smoked once or twice, there wasn’t a lot to clean out. I did a very light reaming and cleaned/sanitized it with q-tips and vodka. There were a couple spots on the outside that needed a quick buff, so they were also buffed with red tripoli and carnauba wax.

Here is the finished product!

The pipe turned out perfect! It’s hard to tell from the lights and reflections but the button end on each side of the stem turned out awesome! I can’t wait for this pipe to find a new home!

Thanks for taking a look!

Savinelli Ed’s 506 Italy Pipe Refurb

Posted on October 30, 2017 by thecashkeepers

I found this “Ed’s” pipe in one of the lots that I purchased recently. I couldn’t for the life of me figure out who “Ed” was or why he had his own pipe line. But I noticed that it also had “506 Italy” next to the “Ed’s”. The more I looked at it, the more I thought that print looked like the Savinelli print. Sure enough, upon VERY close inspection, I found one of the Savinelli logos on the stem. It’s the logo that they used on some of their seconds lines that included a line and a star.

After thorough research on Pipedia and PipePhil, I was unable to turn up an definitive information. So in the end, I am not sure if this pipe was made for a specific shop or if it was made as a seconds line. In either case, it’s a pretty cool Savinelli. Check out the transformation below!

Before Pics:

The Stem
I used my usual method of wet sanding the stem with 500 grit, 1000 grit, and 1200 grit. This part of the pipe takes me the most time so I do that first. I was very careful to leave what was left of the line/star logo on the side of the stem. I finished by buffing with red tripoli and then carnauba wax.

The Bowl
The first thing I went to on the bowl was getting out the nasty buildup by reaming the bowl. After that, I sanded the top of the bowl. I started with a low grit of about 200 because the buildup was bad. I then went to 500 grit, 1000 grit, and 1200 grit to top it off. It looked as if the previous owner had took out a couple chunk of the inside of the rim when reaming long ago. To help even those out a bit, I took some 500 grit sandpaper and used my finger to help round it out a bit. I didn’t completely smooth it out because I hate leaving a chamber more oval than round. That’s all personal preference of course! I finished up by re-staining the top of the bowl. The bowl also got a quick buff of red tripoli and carnauba wax.

Here is the finished product:

Thanks for reading! Let me know if you liked the way the pipe turned out or if you have any information regarding “Ed’s” pipes from Italy!

Dr. Grabow Belvedere Refurb

Posted on September 29, 2017 by thecashkeepers

I received this pipe in a large lot that I purchased online. It turned out really beautiful and I hope that it finds a loving home. Check out the before pictures!

So here is what I did to make it all pretty again!

Stem
I wet-sanded the stem with 500 grit, 1000 grit, and 1200 grit. This process removes any grime and the oxidation off of the stem. Use an LED light and/or a magnifying glass to make sure you get rid of all of the brown (which is oxidation) on the stem. I then used steel wool to clean the metal tenon. The inside of the stem is cleaned with pipe cleaners and a high proof vodka.

Bowl
Oh man! This bowl had some major cake. I started cleaning the cake off by scraping it with a specially designed knife I have. After that I used a pipe reamer to remove the rest of the cake and carbon build up. The bowl was then sanitized with q-tips and vodka. The shank was cleaned with q-tips and vodka. The metal fitting in the shank was cleaned with steel wool.

Here is the finished product!